When there is a problem in a computer system, a majority of the system managers try to access to the device via a console port. Most of the IT equipment are equipped with a system console port, and console connection is a common method for managing the equipment.
The console port is available even though there is a network or system failures. Also, it can be directly connected through a serial port for controlling and monitoring the system. However, because the console port is based on a RS232 communication, it is limited to the communication distance.
Sollae Systems’ console servers, CSE-T16 and CSE-T32, can help you to connect your system console to a network. Therefore, if a network connection is enabled, you can escape from the constraint of distance communication.
This is an application of Sollae Systems’ serial to Ethernet module with a traffic signal controller.
A traffic signal controller is used for the proper operation of traffic lights installed on the road. Because the traffic signal controller is run independently, a vast amount of time loss occurs when to change its settings by hand along to the traffic situation.
In this case, drivers will suffer from the changed signal system that may cause a big concern of accidents. To prevent the situation, it is needed for traffic signal controllers controlled from a remote site.
With Sollae Systems’ serial to Ethernet module, it is feasible to monitor, manage and control traffic situation in real time.
In order to manage equipment in unmanned BTS, you must visit the site regularly. So if you experience a problem with your equipment it takes long time to take action after determining what causes it.
Sollae Systems’ console servers, CSE-T16 and CSE-T32, can help you to connect your system console to a network.
Therefore, if a network connection is enabled, you can identify the problem of the equipment through the console server from a remote site as well as recovering the system.
You can also reset, reboot, reconfigure your equipment without visiting the site.
Sollae Systems’ serial to Ethernet device servers can be applied in catapult monitoring system. A controller of the catapult can monitor various information via a RS232 serial port. Therefore, when you connect Sollae Systems’ serial to Ethernet device server to the RS232 serial port of the controller, it can remotely monitor the real-time data through a network.
Sollae Systems’ serial to Ethernet device servers can be applied with a remote carbon dioxide measuring system.
Carbon dioxide meters measure the concentration of carbon dioxide to maintain clean air for the quality of crops in a greenhouse, a big-sized refrigerator or in a cargo ship.
Sollae Systems’ serial to Ethernet device servers give a network function to gather the meter’s data at a remote site for real-time monitoring.