New F/W of ezTCP
Some of ezTCP’s Firmwares have been changed.
The versions are followed
EZL-200F: 1.3I -> 1.3J
CSE-M32/H20/H21: 1.2H -> 1.3A
CSE-M73 -> 1.4D -> 1.5A
CIE-H10/M10 -> 1.3C -> 1.3D
[Major points of the changes]
1. Add the AT+PSE command in ATC mode: CSE-M32/H20/H21/M73/CIE-H10/M10
AT command lets users operate ezTCP as a TCP server or client.
When TCP connection is established, if you send three escape code “+++”, you can change the Online mode to AT command mode. Doing it, the “+++” character must be sent to your remote host. However, some people didn’t want to send it. To solve this problem, AT+PSE command has been added.
The usage is like this
AT+PSE=0
AT+PSE=1
It’s quite simple.
If the value is 0, the characters are not sent. The default value is “1”
2. Add the MAC ID function: CSE-M32/H20/H21/M73/CIE-H10/M10
MAC ID function is for identification with its MAC address.
Checking this option, ezTCP will send its MAC address to the remote host right after the connection is established. The option is available on both TCP server and client mode.
The options can be configured by ezManager.
(New ezManager(ver.3.0c) is being developed and tested now. And it will be released soon. You can use the option with it.)
For your information, EZL-200F has a similar option with this.
3. Multi Monitoring in RS422/485 connections: EZL-200F
As you know, EZL-200F supports multi monitoring option. 8 different hosts can be connected with the model in the same time. This option was available on RS232 connection in previous F/W. New F/W has been changed at this point.
You can use the option in RS232/422/485.
We are always thinking about users’ convenience in using our products. So, we have been adding a lot of options on their firmware. Thus, we recommend that users always use the latest version of firmware. The file will be on our website.
(0) 
(0)Posted by eztcp
